|
Я не вижу* в перечне 2.16 чего-то похожего, кроме, возможно, пункта 1-3... А для них есть ограничение (не более 5 V), в которое вроде бы ты укладываешься.
*Возможно подслеповат стал.
|
К сожалению, мощя тут исчисляеца киловаттами. Сей девайс с водяным охлаждением.
Capability
Gate Flatness over Operating Frequency
Range
As shown in Figure 5-3. All conditions are met at rated power
for Body and Head modes.
Rated (Peak)
Output Power (PEP): Body Mode: 16 kW Amp, 16 kW PEP; 72dBm
10 kW Amp, 10 kW PEP, 10 kW PEP; 70 dBm
Head Mode: 16 kW and 10 kW Amps, 2 kW PEP; 63dBm
Both outputs producible for any RF input level in the range
defined in section 5.5.1.
Output Power Fault Trip (PEP): Body Mode: 16 kW Amp, 16.8 kW, 72.25 dBm minimum
10 kW Amp, 10.5 kW, 70.21 dBm minimum
Head Mode: 16 kW and 10 kW Amps, 2.1 kW, 63.22 dB
minimum
Measured with nominal 50 ohm load. This represents the
delta between the rated output and the actual peak power trip
level of the amplifier. Trip point is set to ensure delivery of
rated power. Fault trip is based on forward power, not on
delivered power.
Overall Gain (G): Body Mode: 16 kW Amp, 72.04dB ± 1dB,
10 kW Amp, 70 dB +/- 1 dB,
Head Mode: 16 kW and 10 kW Amps, 63.04dB ± 1dB,
Note: Gain referenced to 0dBm RF input level
Pulse Length, Max (Tpmax): Unlimited
UNBLANK Duty Cycle (DC): Maximum of 100%
UNBLANK Speed (time to stable gain): < 50 uSec
BLANKing Speed (time to noise floor): < 10 uSec
Minimum BLANKing Time (TBLANK): 100 uSec