Показать сообщение отдельно
Volodzhero
Завсегдатай
 
Регистрация: 07.08.2017
Сообщений: 54
Благодарности:
отдано: 22
получено: 5/4
Помогите с кодом

Добрый день. Помогите пожалуйста код (думаю 8481...., дальше не знаю(() на противопожарные клапана, картинка в приложении, диаметры 1100мм, 1120 мм, 1400 мм. Вал диска клапана поворачивается приводом. Диск клапана можно поворачивать в радиусе 90 °, поэтому он может быть полностью открыт, полностью закрыт или находиться в любом положении. Положение диска клапана регулирует количество воздуха / газа, которое пройдет через заслонку (чем меньше зазор, тем меньше воздух).

Техничка на них:
Pos. 1 Surface versifying wafer damper
Consisting of:
3 pc. Wafer damper DN 1120
1 pc. Wafer damper DN 1400
Incl. pneumatic drive (single-acting, fail-safe position: closed, 6 bar control pressure), actuating valve (EAC-certified), 2 micro switches with display open-close (EAC-certified) as well as the necessary adjustments in the control cabinet for activation of the damper by external fire alarm signal
Dampers without fire protection license
Closing time <2s
Tightness 99,5% (surface equivalent)

Pos. 2 Alternatively: Soft sealing wafer damper
Consisting of:
4 pc. Wafer damper DN 1100
Incl. pneumatic drive (single-acting, fail-safe position: closed, 6 bar control pressure), actuating valve (EAC-certified), 2 micro switches with display open-close (EAC-certified) as well as the necessary adjustments in the control cabinet for activation of the damper by external fire alarm signal
Dampers without fire protection license
Closing time <2s
Tightness approx. 100% (soft sealing, sealing: Viton green)
Изображения
Тип файла: jpg Damper.jpg (6.4 Кб, 8 просмотров)
Тип файла: jpg damper single parts 2.jpg (8.0 Кб, 7 просмотров)
Тип файла: jpg damper single parts 1.jpg (9.6 Кб, 12 просмотров)
Volodzhero вне форума   Ответить с цитированием