![]() |
|
|
|
Тема : Помогите с кодом | Опции темы | Опции просмотра |
Завсегдатай
Регистрация: 07.08.2017
Сообщений: 54
Благодарности:
отдано: 22
получено: 5/4
|
24.10.2017, 12:26
#1
Помогите с кодом
Добрый день. Помогите пожалуйста код (думаю 8481...., дальше не знаю(() на противопожарные клапана, картинка в приложении, диаметры 1100мм, 1120 мм, 1400 мм. Вал диска клапана поворачивается приводом. Диск клапана можно поворачивать в радиусе 90 °, поэтому он может быть полностью открыт, полностью закрыт или находиться в любом положении. Положение диска клапана регулирует количество воздуха / газа, которое пройдет через заслонку (чем меньше зазор, тем меньше воздух).
Техничка на них: Pos. 1 Surface versifying wafer damper Consisting of: 3 pc. Wafer damper DN 1120 1 pc. Wafer damper DN 1400 Incl. pneumatic drive (single-acting, fail-safe position: closed, 6 bar control pressure), actuating valve (EAC-certified), 2 micro switches with display open-close (EAC-certified) as well as the necessary adjustments in the control cabinet for activation of the damper by external fire alarm signal Dampers without fire protection license Closing time <2s Tightness 99,5% (surface equivalent) Pos. 2 Alternatively: Soft sealing wafer damper Consisting of: 4 pc. Wafer damper DN 1100 Incl. pneumatic drive (single-acting, fail-safe position: closed, 6 bar control pressure), actuating valve (EAC-certified), 2 micro switches with display open-close (EAC-certified) as well as the necessary adjustments in the control cabinet for activation of the damper by external fire alarm signal Dampers without fire protection license Closing time <2s Tightness approx. 100% (soft sealing, sealing: Viton green) |
![]() |
Ответить с цитированием |
|